DEAR POLE BARN GURU: I’m very interested in doing business with you, I just have a few questions. I originally asked for a quote of a pole barn of 200×50 I believe it was, my question is, can your buildings be added on to? Would we be able to start with something much smaller and then add on to the barn as we go? NOW IN NEW JERSEY
DEAR NOW: Yes, our buildings can be added on to. I would recommend the initial design be done with the idea of what the ultimate finished goal will be for size. Oftentimes, original structures are not structurally set up for the eventual expansion, which keeps the initial price low, but results in headaches and costs later, which could have been avoided with proper planning. A gabled roof will be the easiest roof style to work with when it comes to future expansion.
We have several customers who have done just as you suggest, adding on to one or both ends as they expand. Get the width you ultimately want, then adding length is much easier You can remove endwall siding, add on additional bays, and put the endwall siding back on. You may have to purchase more trims, but if steel siding, is easily reused for the addition.
And I always recommend – build as much building as you have space for and can afford economically, as whatever size you pick, it will never be large enough.
DEAR POLE BARN GURU: I’ve read ALL of your blogs! Back to 2010. And love them. I write similar stuff in my business.
The question is do you have, or can you get, closures similar to ridge vent, but as a bottom closure to be used at the eave of a building without overhangs? BREEZY
DEAR BREEZY: Thank you for your dedicated readership and …good question! There is not such a beast, and even if there was, the net ventilation would be tiny – not enough to yield any positive results, as the only area which could have a vent would be just at the high ribs. The correct way to vent would really be with enclosed vented overhangs.
DEAR POLE BARN GURU:I have an existing pole building with badly deteriorating insulation and vapor barrier for the roof.
I plan to pull all of the old insulation and vapor barrier out to replace it. I’d like to use the reflective radiant barrier / vapor barrier you recommend for new construction. I’m considering pulling the metal roofing off to do it right so I don’t have to do it again later.
Do you recommend installing the reflective radiant barrier / vapor barrier between the metal roofing and purlins or between the purlins and roof trusses? DETERIORATING IN DELAWARE
DEAR DETERIORATING:
Place the reflective radiant barrier over the purlins and directly under the roof steel. You will need to use larger diameter, longer screws to reattach the roof steel.
DEAR POLE BARN GURU:Where can I buy Owens Corning Foamular Fanfold foam 1/4″ thick? A lot of my fellow RC plane hobbyists are having a hard time finding this stuff. Thanks in advance. FLYING IN FREMONT DEAR FLYING: Visit the Contractor Desk of any The Home Depot®. If it is not in stock, it can be ordered in within a matter of just a few days.
