Welcome to Ask the Pole Barn Guru – where you can ask questions about building topics, with answers posted on Mondays. With many questions to answer, please be patient to watch for yours to come up on a future Monday segment. If you want a quick answer, please be sure to answer with a “reply-able” email address.
Email all questions to: PoleBarnGuru@HansenPoleBuildings.com
DEAR POLE BARN GURU: I recently ordered a pole building kit package. The agreed snow load was 35. A minimum of 34 is required in our area. The calculations supplied are for 28, not 34. So now we are out another $800 and
back to square 2.
What can be done, and how fast? SNOWING IN SNOHOMISH
DEAR SNOWING: We’d all like to believe Building Department Plans Examiners are infallible. The reality is, the IBC (International Building Code) is a huge and complex document, which is further complicated by its references to numerous other outside documents.
The agreed upon snow load which you purchased, was 35 pounds per square foot (psf) as a GROUND SNOW LOAD (or Pg). The Code references a document called ASCE 7-10 (for the 2012 version of the Code). ASCE 7-10 gives the formula to convert Pg to flat roof snow load (Pf). This formula takes into account factors such as Building Importance, if Building is heated or not and the roof’s exposure to the wind. The roofing material also comes into play with the heating or not of the building.
Pf is also adjusted for roof slope, to get to the design sloped roof snow load (Ps).
In your particular case, our office made a call to your plans examiner who has now been happily educated.
For further reading on this subject, please see the article I wrote for Structural Building Components magazine: https://sbcmag.info/article/2011/it-isnt-your-grandpas-barn-tips-technicians-designing-post-frame-trusses
DEAR POLE BARN GURU: I have an old metal barn that needs new doors and hardware. A pair of sliding doors that are each 10′ wide by 14′ tall. We had a storm that blew them off and damaged the tracks and channels. We live in Fowler, Colorado. Do you have a dealer here in Colorado? Or can we get them from you to install ourselves? Any information would be appreciated. CAUGHT IN COLORADO
DEAR CAUGHT: Sliding doors can be a challenge in wind storms. If they are not correctly designed, installed, or kept closed and latched during high winds, they can all too easily end up as an unusable pile of rubbish. Sliding door frames which are built either partially or all from wood, are especially susceptible to failure under load.
Hansen Pole Buildings provides sliding door systems and components direct to builders and end users in all 50 states. The doors are designed for the average individual to successfully assemble and install their own sliding doors, by following the detailed step-by-step instructions.
Call us and we will get you started on the path to replacing those doors.
DEAR POLE BARN GURU: Hello, I am helping a friend build and install sliding doors on his pole building. The building is otherwise complete. The door openings are pretty much ready to go as I can see. They are framed in and the upper track is installed. So here I come with a pile of steel siding, steel studs, track for SIDS and button of doors, rollers (pendant) and screws… The instructions he has are very vague. Can you provide me with any plans, prints, instructions of any kind please? Also a photo or diagram of what the finished product should look like?
They have a binder with instructions that supposedly came with the kit and your logo on the front of it. I’m not there at this time so if you need the model name/# I can send it to you this afternoon when I get there. WONDERING IN WASHINGTON
DEAR WONDERING: While our sliding door systems are relatively simple for the average individual to install – having the detailed step-by-step instructions included in our Construction Guide, in hand would be a serious assist.
The manual devotes 18 pages which include actual photos, as well as diagrams showing how to properly (as well as most quickly) assemble and install each component. Check the manual for these pages and then let me know if you still need help. Often people think the instructions come with the door and we’ve found having them in the Construction Guide makes them easier to find.
